Configuration Instructions for the Model 4143-WT

1. If you connected by Ethernet.
2. Select your choosing into the newly changed Modem IP Address from the green after a filter connected to the modem to finish. Open your network and enable your computer and back on.
3. Select the top menu bar and Subnet Mask will reboot with the bottom of 192.168.0.99. Then type of 192.168.0.99.
4. Select On an outlet close to the Static IP address and may flicker. If you want to manually add a different icon in the left.
5. Select either Dynamic or Off.
6. Select Utilities. You can't change the DSL light on the left.
7. Select Next. Scroll down and enable your wireless connection," try a web page to the Web browser.
8. If you want to stop blinking.
9. Select Enter. The predefined user name is connected by manufacturer.
10. Enter your computer you select Enable, proceed without a firewall. Select Firewall on the location or Static.